|
JMM
|
 |
« Répondre #15 le: 31 Août 2010, 18:11:30 » |
|
OK.. a very stupid error  Une erreur très stupide A new version in the next hours after checking HW:LG a bit  Une nouvelle version dans les prochaines heure après avoir testé un peu HW:LG JMM |
|
|
|
« Dernière édition: 31 Août 2010, 19:00:39 par JMM »
|
Journalisée
|
|
|
|
JCM101
Capitaine
 Hors ligne
Messages: 167
|
|
« Répondre #16 le: 31 Août 2010, 18:15:47 » |
|
Vraiment alléchant! |
|
|
|
|
Journalisée
|
|
|
|
|
Bruguière
|
|
« Répondre #17 le: 31 Août 2010, 18:17:08 » |
|
Alors j'attends....  |
|
|
|
|
Journalisée
|
|
|
|
|
Gunner24
|
|
« Répondre #18 le: 31 Août 2010, 18:21:33 » |
|
Mistakes are easy to make, and everyone makes them sometimes, the important thing is to be able to correct them.
Thanks JMM for keeping us posted on the 2d "news".
|
|
|
|
|
Journalisée
|
|
|
|
|
AJ
|
|
« Répondre #19 le: 31 Août 2010, 19:39:45 » |
|
No giant problem. I made some OOB's while still patched at 02d, then reinstalled patch 02c. All is good and will welcome the new patch when tested. I ask a question? Would a big corporation who made a bad patch, spend half the night trying to fix it? No !!!! but JMM did, so I say thankyou and it will all turn out right  |
|
|
|
|
Journalisée
|
|
|
|
|
JMM
|
|
« Répondre #20 le: 31 Août 2010, 20:43:31 » |
|
Hello, Patch02d Patch to apply to HistWar Version 2cYou have to install this new version 02d RC2 [over 2c, 2d(RC) or 2d(RC1)] http://www.histwar.org/mods/file.php?id=72Version code of HistWar : 2.02d JMM |
|
|
|
|
Journalisée
|
|
|
|
|
Bruguière
|
|
« Répondre #21 le: 31 Août 2010, 21:20:03 » |
|
Merci patron.... |
|
|
|
|
Journalisée
|
|
|
|
|
Bruguière
|
|
« Répondre #22 le: 31 Août 2010, 21:38:59 » |
|
Il semble qu'il y ait encore des soucis....
Les unités restent immobiles au départ et invisibles en vue F4, sur trois scenarii....
|
|
|
|
|
Journalisée
|
|
|
|
|
Franciscus
|
|
« Répondre #23 le: 31 Août 2010, 23:18:40 » |
|
I am glad JMM started to name the patches as release candidates (= beta patches). It should now be more clear that this is not yet a "definite", "official" patch, problems may exist and who chooses to install it should expect them. If someone does not want to "test" a patch, just stick to the last "official" one - this is just like other small developers are doing (eg, Ageod, Norbsoftdev).
Regards
|
|
|
|
|
Journalisée
|
|
|
|
|
AJ
|
|
« Répondre #24 le: 31 Août 2010, 23:43:34 » |
|
Merci beaucoup JMM
|
|
|
|
|
Journalisée
|
|
|
|
|
Franciscus
|
|
« Répondre #25 le: 01 Septembre 2010, 00:19:53 » |
|
Had time for a quick battle with patch 2d RC2 - Haslach. For the first time since release, I noticed a bad graphic bug in 3d views (see pic). My GC is an ATI 5750, I have not changed either the card or the drivers (ATI 10.4) but that's the first time I have seen this. The bad graphics appear mainly when I rotate quickly the camera, but sometimes also changing the elevation. It DOES not appear to be limited to having French units present, even right-clicking on an empty spot on 2d map gives this bug, sometimes.
On the other hand, no problems with ordering/moving units or with the F4 view...
A quick tour on Friedland did not showed this graphic bug...
I had already played Haslach a few months ago, and I do not remember seeing this. Could it be the problem kiva has reported already with ATI cards ??
|
|
|
|
« Dernière édition: 01 Septembre 2010, 00:25:19 par Franciscus »
|
Journalisée
|
|
|
|
|
JMM
|
|
« Répondre #26 le: 01 Septembre 2010, 00:38:48 » |
|
This problem appears with the new version 2 with the ATI Graphic board.
I thought it was fixed after the version 02c.. but not!
I'll try with my ATI configuration on Haslach. BTW, do you get this trouble with the map editor?
JMM
|
|
|
|
|
Journalisée
|
|
|
|
|
AJ
|
|
« Répondre #27 le: 01 Septembre 2010, 00:54:19 » |
|
I just ran Haslach scenario on my ATI Radeon Mobility HD 4200 and I had Zero graphic bugs in F3. So this bug cannot apply to all ATI cards, Thank God !!!!! In fact I must be blessed because this card has not given me any 3D bugs with Histwar
|
|
|
|
« Dernière édition: 01 Septembre 2010, 00:56:33 par ajlewisbrookes »
|
Journalisée
|
|
|
|
L.A. Berthier
Capitaine
Hors ligne
Messages: 104
|
|
« Répondre #28 le: 01 Septembre 2010, 08:29:16 » |
|
Had time for a quick battle with patch 2d RC2 - Haslach. For the first time since release, I noticed a bad graphic bug in 3d views (see pic). My GC is an ATI 5750, I have not changed either the card or the drivers (ATI 10.4) but that's the first time I have seen this. The bad graphics appear mainly when I rotate quickly the camera, but sometimes also changing the elevation. It DOES not appear to be limited to having French units present, even right-clicking on an empty spot on 2d map gives this bug, sometimes.
On the other hand, no problems with ordering/moving units or with the F4 view...
A quick tour on Friedland did not showed this graphic bug...
I had already played Haslach a few months ago, and I do not remember seeing this. Could it be the problem kiva has reported already with ATI cards ??
I have the same problem with my ATI,RadeonHD2600. And the problem is presenra by 2b, if I remember right. |
|
|
|
|
Journalisée
|
|
|
|
|
Franciscus
|
|
« Répondre #29 le: 01 Septembre 2010, 08:41:51 » |
|
(...)
BTW, do you get this trouble with the map editor?
JMM
Do you mean, if I have this problem in Haslach map opened in the map editor ? No idea, I will try later tonight or tomorrow. Regards |
|
|
|
|
Journalisée
|
|
|
|
|
HistWar – Les Grognards (English zone) > General discussions (Modérateurs: Duke of Earl, Montecuccoli, gazfun, von_Clausewitz) > Re : Patch 02d
